Xpower X-4700A Professional 3-Stage HEPA Air Scrubber
The XPOWER X-4700A 3 Stage HEPA Air Scrubber is a commercial purification system featuring a powerful external rotor induction motor that produces a maximum 750 CFM while drawing 4.5 Amps. Designed to restore indoor air quality at a variety of job sites, the X-4700A will effectively remove airborne contaminants utilizing its 3-stage filtration technology. Stage 1 – Nylon Mesh Filter is washable and will help to extend the life of the 2 subsequent filters. Stage 2 – Pleated Media Filter will assist in removing additional impurities. Stage 3 – 2” HEPA Filter will capture contaminants as small as 0.3 microns at an effective 99.97% rate. Each X-4700A includes an indicator light that illuminates when the HEPA filter needs replacing. The X-4700A features a variable speed control switch and can be daisy chained with 2 built-in GFCI power outlets. Stackable and lightweight for easy storage and transportation, the attached fitted foam cap will prevent contamination between job sites and storage. The compact and lightweight design is ideal for water damage restoration and a variety of construction applications. An optional Activated Carbon Filter is available in remediating smoke damage caused by fire, neutralizing pet odors, and other noxious gases.
**Filters Included:**
• NFS16 – Washable Nylon Mesh Filter
• PF16 – Pleated Media Filter
• HEPA50 – 2 in. Thick HEPA Filter
Overview
The XPOWER X-4700A Professional 3-Stage HEPA Air Scrubber helps improve indoor air quality on demanding jobsites, from water damage restoration and construction cleanup to mold remediation support and odor control. Its high-efficiency 2/3 HP motor delivers up to 750 CFM while drawing only 4.5 amps, giving crews strong filtration performance without excessive power demand.
The X-4700A uses a 3-stage filtration system to capture progressively smaller airborne particles. The washable NFS16 nylon mesh filter catches larger debris and helps extend the life of the downstream filters. The PF16 pleated media filter removes additional fine impurities, while the HEPA50 2 in. HEPA filter captures particles as small as 0.3 microns at a 99.97% efficiency rate.
Built for field use, the X-4700A includes variable speed control, a filter clean/change indicator light, two built-in GFCI outlets for daisy chaining, a grab-and-go handle, wrap-around cord storage, and a stackable housing for storage or transport. A fitted foam cap helps contain contaminants between jobsites and during storage.
Features & Benefits
3-Stage HEPA Filtration: NFS16 washable nylon mesh, PF16 pleated media, and HEPA50 2 in. HEPA filter.
Jobsite-Ready Power: 750 CFM airflow, 4.5 amp draw, variable speed control, and GFCI daisy-chain outlets.
Built for Transport: Lightweight 33.1 lb body, integrated handle, wrap-around cord, foam cap, and stackable design.
Restoration Applications: Water damage restoration, construction cleanup, remediation work, pet odor control, and optional carbon filtration for smoke and odors.
Specifications
Volts / Cycle: 115V / 60 Hz
Motor: 520W, 2/3HP
Power: 4.5 A
Rated Airflow: 750 CFM
Speeds: Variable Speed Control Switch
RPM: 700 – 2,850
Unit Weight (lbs): 33.1
Unit Dimensions (L x W x H): 19.6" x 12.3" x 21.3"
Box Weight (lbs): 36.4
Box Dimensions (L x W x H): 21.3" x 14.0" x 22.8"
Cord Length: 13 ft
Cord Dial: 14 AWG
Housing: Injection Mold ABS
Stackable: Yes
Safety Certifications: ETL / CETL
Duct Sizes: 6" x 11.9"
Filter Change Light: Indicates when primary HEPA filter needs to be changed
Warranty: 1 Year Limited
UPC: 848025051269