Karcher Holder S 75
Explore Karcher Holder S 75 commercial cleaning equipment from Americhem.
Specifications
Engine: Deutz TCD 3.6 four-cylinder common rail turbodiesel
Power: 75 HP (55.4 kW)
Max. torque at 1,300 rpm: 390 lbf∙ft / 280 Nm
Cubic capacity: 3,621 cm³
Emission standard: Tier 4 Final
Fuel tank: 22 gal (84 l)
Drive: Infinitely variable DUAL DRIVE traction drive system
Speed: Driving speeds 0-25 mph (0–40 km/h) fast gear / 0-25 mph (0–20 km/h) slow gear
Service brake: Hydraulically activated wet disc brakes, active on all four wheels
Parking brake: Electric parking brake, active on both axles
Front PTO shaft speed: Switchable from 540 to 1,000 rpm at 1,700 rpm engine speed
Tandem pump volume flow: 2 × 19 cm³/rev or 11 gpm (43.5 l/min) at 2,611 psi (180 bar)
Volume flow of implement variable displacement pump: 0-32 gpm (0–120 l/min) at 4,061 psi (280 bar)
Hydraulic control units: Up to four double-acting control units
Hydraulic tank: 9 gal (34 l) with fill level sensor
Front power lift: CAT II, double-acting, with floating position and vibration damping system
Lifting force: 5,952 lb (2,700 kg)
Unladen weight: 6,834 lb (3,100 kg)
Total permissible weight: 12,125 lb (5,500 kg)
Permissible axle load: Front: 7,054 lb (3,200 kg) Rear: 7,054 lb (3,200 kg)
Towing capacity: Unbraked: 5,511 lb (2,500 kg) Overrun braked: 9,920 lb (4,500 kg)
Wheelbase: 72” (1,827 mm)
Total length incl. front power lift: 147” (3,750 mm)
Total height: 89” (2,270 mm)
Total outer width: 51” (1,310 mm)
Turning circle radius outside: 275” (7,000 mm)