Karcher Holder Holder S 100/130

Specifications

Engine Power: 101 HP (75 kW) - 129 HP (96 kW)

Max. torque: 410 Nm at 1600 rpm

Cubic capacity: 3,621 cm³

Emission standard: Tier 4 Final

Fuel tank: 21.6 gal (82 l)

Drive System: Infinitely variable DUAL DRIVE traction drive system

Driving speeds: 0-25 mph (0–40 km/h) (fast gear); 0-12 mph (0–20 km/h) (slow gear)

Working speeds: 0-9 mph (0–15 km/h) (fast gear); 0-5 mph (0–8 km/h) (slow gear)

Differential lock: Front and rear mechanical with 100% locking effect

Service brake: Hydraulically activated wet disc brakes, active on all four wheels

Parking brake: Electric parking brake, active on both axles

Front PTO shaft speed: Switchable from 540 to 1,000 rpm at 1,700 rpm engine speed

Tandem pump volume flow: 2 × 19 cm³/rev or 11 gpm (43.5 l/min) at 2611 psi (180 bar)

Volume flow of implement variable displacement pump: 0-32 gpm (0–120 l/min) at 4061 psi (280 bar)

Hydraulic control units: Up to five double-acting control units

Hydraulic tank: 9 gal (34 l) with fill level sensor

Front power lift: CAT II, double-acting, with floating position and vibration damping system

Lifting force: 5952 lb (2,700 kg)

Unladen weight: 6834 lb (3,100 kg)

Total permissible weight: 12125 lb (5,500 kg)

Permissible axle load: Front: 7054 lb (3,200 kg), Rear: 7054 lb (3,200 kg)

Towing capacity unbraked: 5511 lb (2,500 kg)

Towing capacity overrun braked: 9920 lb (4,500 kg)

Wheelbase: 72” (1,827 mm)

Total length incl. front power lift: 154” (3,920 mm)

Total height: 88” (2,233 mm)

Total outer width: 53” (1,360 mm)

Turning circle radius outside: 120” (3,045 mm)